33208 FW06 GP Acura NSX GT3 PureTen Readyset
Enjoy a wide range from parking lots to race circuits.
Proven shaft-driven 4WD chassis with newly developed engine!
User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power new KE15SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P+ transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P+ also features a failsafe function that automatically reduces the throttle if radio signal is interrupted *may need to check setting before first run*. Simply switch the power on and you can be on the track and clocking race-winning times straight away.
- Equipped with KE15SP engine with slide carburetor fitted with slow idle adjustment.
- Universal swing shafts included on front.
- Turnbuckle tie-rods used for steering rod and rear upper arms for adjustable alignment.
- KYOSHO's proven center-shaft drive 4WD provides light control response.
- Disk brakes deliver reliable and responsive braking control.
- Unique compact recoil starter starts the engine with a few pulls of the starter cord.
- Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
- Fitted with tuned muffler.
- High-grip rubber tires with inner sponge supports are pre-mounted.
- Compatible with many FW-05 parts. *Not compatible with some parts*.
- Fully-assembled chassis complete with pre-set control linkages
- Installed KE15SP engine with recoil starter
- Special manifold and tuned muffler
- Finished pre-cut, pre-painted body
- Syncro KT-231P+ transmitter
Required for Operation
- 8 X AA batteries for radio system
- Fuel
- Fuel bottle
- Plug heater
Technical Data
- Length 372mm
- Width 200mm
- Height 100mm (approx.)
- Ground Clearance 5mm
- Wheelbase 258mm
- Tread (F/R) 176mm
- Tire(F/R) 66×25mm
- Gear Ratio 7.47 / 5.44:1
- Weight 1,800g (approx.)
- Engine KE15SP with recoil starter
